beBee background
Inicio
>
Professionisti
>
Servizi / Energia
>
Morsiano
Gianni Sperandei

Gianni Sperandei

sviluppo progetti aree rurali terzo mondo.

Servizi offerti: Generatori

Morsiano, Villa Minozzo, Reggio Emilia
€60 / ora
Tasso approssimativo

Sociale


Informazioni su Gianni Sperandei:

Mi occupo di sviluppare progetti che spaziano dalle energie alterantive alla gestione dei progetti WASH. Inoltre mi occupo della gestione delle flotte e della pianificazione e gestione delle manutenzioni di gruppi elettrogeni  fino a 6000 KVa. 

Esperienza

April 2022-December 2022

 

 

 

 

 

 

 

 

 

 

 

 

    January 2021 – till now

Aics Evaluation of water supply methodologies in rural areas of Sudan and Eritrea. Redesign and construction of systems for pumping water from the subsoil. Repair of photovoltaic systems and generators to supply the wells and related services. Supervision of installation and testing works for the grain processing plant. Especially sesame.Aics Evaluation of water supply methodologies in rural areas of Sudan and Eritrea. Redesign and construction of systems for pumping water from the subsoil. Repair of photovoltaic systems and generators to supply the wells and related services. Supervision of installation and testing works for the grain processing plant. Especially sesame. installation of data network and satellite internet connections for offices in Kassala. Repair of some ambulances donated by the Italian government to Sudanese hospitals.

 

Recycling machine developer

Private investment supported by the University of Modena and Reggio Emilia (UNIMORE), ITALY
  • Creation of a new multipurpose pyrolytic prototype for the disposal of plastic waste capable of producing electricity, domestic hot water, and chilled water. Project under development with the collaboration of the chemistry and engineering department of UNIMORE.
  • Training in green energy, W.A.S.H., solar pumps, photovoltaic.
Business or sector Renewable energies, engineer. 
  
April 2019 – December 2021WASH and Agro-industrial developing Consultant
ITALIAN AGENCY FOR DEVELOPMENT AND COOPERATION (AICS) and UNIDO, SUDAN
  • Feasibility study of a water collection and transport system for the Mayo refugee camp.
  • Design and development of a low-polluting cold room for the storage of fruit and vegetables produced by local farmers’ associations within the Kassala State. Development of a remote monitoring and control system for the plant. Location of the cold storage: city of Kassala.
  • Feasibility study for the construction of a plant for the processing and storage of sesame produced by local farmers’ associations. International market surveys for the supply of a complete sesame processing plant. Design and sizing of the sesame processing plant and all the accessories necessary for its operation, such as power generator, shed, lighting and ventilation system, weighing system and storage of the processed goods.
  • Feasibility study for a wastewater irrigation scheme in the New Alpha area. 
  • Design and upgrade of a monitoring system of venomous deposits in groundwater and artesian wells. 
  • Feasibility study of a wind-solar-water mixed electricity production system.
Business or sector Development cooperation interventions: technical-mechanical assistance, rural development, alternative energy, refrigeration systems, wash.
 

 

 

September 2018 – March 2019Alternative energies and Agro-industrial developing Consultant
ITALIAN AGENCY FOR DEVELOPMENT AND COOPERATION (AICS) and UNIDO, SUDAN
  • Design and construction of pyrolysis plants for waste disposal - in particular, hospitals’ waste. Design and implementation of preparatory courses for the construction, management and maintenance of pyrolytic machines. Implementation of biodigesters for biogas production. Design and construction of plants and storage systems for the biogas produced. Implementation of systems for the use of biogas in domestic use and for cooking. 
  • Feasibility study for the remediation and safety of areas subject to flooding during the rainy season – focus on Mayo refugee camp, Khartoum. 
  • Feasibility study for the design of a cold room for the storage and maintenance of agricultural products with the addition of inert gas for long conservation. 
  • Design and developing cold storage systems for agricultural purpose in rural areas. Developing data logger systems for data collection for multiple uses like fleet management, collection info from cold storage uses, gen sat plant management or solar panels or wind turbines.
  • Training to local staff for the on-site management of the cold storage system, organized partly in Sudan and partly in Italy thanks to the collaboration of UNIMORE (University of Modena and Reggio Emilia).
  • Development and implementation of new technologies in the alternative energy sector, such as photovoltaic, wind and systems that exploit waste. In particular, production of electricity through pyrolysis to dispose of plastic.
  • Off-road driving courses to AICS and UNIDO drivers in extreme conditions such as mud, sand, high temperatures. 
Business or sector Development cooperation interventions: technical-mechanical assistance, peri-urban and rural development, alternative energy, refrigeration systems. 
  
2014 – September 2017Technical Hospitals Manager
Emergency - Life Support for Civilian War Victims Ong-Onlus, SUDAN
  • Technical Manager of 3 hospitals in Sudan: Salam Centre for Cardiac Surgery – Khartoum, Paediatric Centre for Children in the Refugee Camp – Mayo (Khartoum), Paediatric Centre – Port Sudan. 
  • Organisation and supervision of the work of a team composed of 30 national employees for the ordinary and extraordinary maintenance of various electrical, water, medical gases, power generators, ups, cooling and air conditioning systems, plumbing. Management of thermal solar panels plants and pyrolysis systems for waste disposal.
  • Design and construction of water wells and potable water systems for the Mayo Paediatric Centre and developed a wireless system for the continuous monitoring of water potability in the wells.
  • Thanks to my previous experience in Automotive sector, design and set up of mechanical workshop which (from 2015) within the compound of the Salam Centre, aiming at a proper maintenance and revision of the vehicles supplied to the hospitals.

Business or sector Development cooperation interventions: technical-mechanical assistance, health, WASH,  alternative energy, peri-urban development.

 

 

  
1994 – 2013Technical Hospitals Manager
VS Engineering di Sperandei Gianni, ITALY
  • Technical manager of motor racing teams as a race engineer, freelance telemetry, in both covered and discreet wheeled cars.
  • Design of maintenance of high-pressure water pumps, waste disposal systems for electricity generation and pyrolysis and gasification systems.
  • Collaboration with Aston Martin, Porsche, Ferrari, Lamborghini, GM, BMW Alfa Romeo, and Mercedes in the covered wheel industry, in F.3 and F.3000 in the discreet wheel industry. Followed upgrading courses as engine technician at Mercedes with Hunger engineer.
  • Development and testing both on the track and on the road of Bizzarrini Ghepardo; followed the engine part, directly from the USA, with the Katech supplier, the redesign of the electrical system, the discharge and suction plant, the transmission shaft the suspensions (2009 - 2010).
  • Followed all the approval phases for both road and FIA use for the track.
  • In Bizzarrini, followed suppliers such as: Magneti Marelli Bosch, Pirelli, SKF, Mobil, TWR, Koni, Bilstein, Brembo, Arvin Meritor, OZ racing etc. and other potential buyers. Involved in drawing up manuals for workshop, cars, and car components.
  • Followed the creation and implementation of the Villois team with the Aston Martin GT3 in the OPEN GT Championship. Played the role of technical director and looking after suppliers (2007 – 2009).
  • Followed the Porsche cup championship for Turin's team, first as a track engineer and then as a technical director (2005 - 2008).
  • Followed as a track engineer some European Lamborghini Gallardo races, for “Reiter engineering” (2007).
  • Followed the Italian prototype championship as technical director with SR2 and Cn4 cars (2003 – 2005).
  • Astra team's technical and track engineer. Followed both the cars of the Mazda single-car championship and the cars involved in the World Rally Championship (2001 – 2003).
  • Technical assistance and logistics organization at Toyota France engaged in competitions tout terrain   (1998 - 2000). 
  • I Followed teams involved in the rallies and off-road competitions (1994 – 1997).
Business or sector Research, design, development, testing and prototyping for industrial, automotive, and alternative energy sectors.

Educazione

Business or sector Research, design, development, testing and prototyping for industrial, automotive, and alternative energy sectors.

Professionisti che competono con Gianni

Professionisti dello stesso settore Servizi / Energia di Gianni Sperandei

Professionisti di diversi settori vicino a Morsiano, Villa Minozzo, Reggio Emilia

Altri utenti che si chiamano Gianni

Offerte di lavoro vicino a Morsiano, Villa Minozzo, Reggio Emilia

  • Cronoshare

    Preventivo per progetto e riforma per appartamento di 100 m²

    Trovato in: Cronoshare IT C2 - 3 giorni fa


    Cronoshare Sassuolo (Modena), Italia

    Dovrei ristrutturare un appartamento del 1972 di circa 120 mq al terzo ed ultimo piano di un condominio senza ascensore. C'è da rifare tutta la pavimentazione demolire un paio di tramezze. Rifare gli ...

  • E80 Group S.p.a.

    Responsabile del Progetto

    Trovato in: Talent IT C2 - 1 giorno fa


    E80 Group S.p.a. Viano, Italia €50.000 - €80.000 all'anno

    Chi Siamo · E80 Group è una multinazionale specializzata nella realizzazione di soluzioni intra-logistiche automatizzate ed integrate per le imprese produttrici di beni di largo consumo e centri di di ...

  • Argo Tractors

    Ingegnere di Progetto

    Trovato in: Talent IT C2 - 1 giorno fa


    Argo Tractors Sarzana, Italia €40.000 - €60.000 all'anno

    Project Engineer: si confronta con le diverse aree aziendali per la gestione di un nuovo progetto; dalla identificazione delle specifiche tecniche del trattore alla realizzazione in produzione · Sede ...